Cold Water Meter - Positive Displacement

Elster AMCO Water's C700 oscillating piston type water meters are the most advanced design positive displacement meters available.  Boasting dependability and engineering excellence, the C700 line, sizes 5/8” to 2”, can be offered with a variety of registers, pulsers and material configurations, including a choice of waterworks or NSF-61 certified low-lead bronze main cases.  These meters are appropriate for applications in direct read, pulse output, batching and rate of flow for plant maintenance.

The C700's uniquely designed chambers, with dual-stage pistons, are custom engineered for performance exceeding applicable AWWA standards. Nylon materials are selected for strategically placed wear areas, providing long life and reduced noise.

Indicative of the product's versatility, all direct read meters are easily converted with pulse generator, encoder or transmitting registers for remote, electronic or automatic meter reading compatibility. For easy and accurate visual reading, C700 meters incorporate a very large (3 1/2") register with large color-coded odometer wheels. The register's leak detector registers even the smallest flow due to the unique 1:1 ratio to the piston.

The V100 is a compact, lightweight positive displacement meter of a piston design in sizes ½”x ½” in polymer and ½”x ½”to 5/8”x ¾”.  Meters are low cost and operate ± 1 ½%.  V100 is for services up to 120º F and 150 psi.  The V100 is appropriate for applications with water conditioning and purification.

Please call 888-667-4278 or 513-942-3600 for sizing, application or to place an order.


Cold Water Meter - Commercial

Elster AMCO Water turbine meters and compound meters provide long-life, high accuracy measurement for high volume services.

T4000/TS4000 turbine meters are engineered for performance:

  • The turbine's throated inlet increases low flow sensitivity, assuring maximum revenue with low pressure loss

  • The debris damage typical of high volume installations is minimized by a design that incorporates space to allow passage of many suspended solids.

  • Selection of high quality materials extends service life

The family of top-performing AWWA Class II turbine meters includes bronze-case sizes 1 1/2" to 8" T4000, 1 1/2" to 6" TS4000 meters, epoxy-coated, cast iron-case 10" and 12" T4000 meters and the lightweight aluminum case 3" fire hydrant meter for temporary water services.

Where service flow variations extend from very high to very low, C3000 compound meters offer a revenue assuring choice.  C3000 compound meters incorporate the performance of the industry's top performing meter designs:  the C700 positive displacement meter and T3000 turbine meter, offering unparallel accuracy through the entire flow range. Modular construction, long-life designs for both turbine (high flow) and positive displacement (low flow) measurement, and a high performance valve that directs flow to the appropriate chamber, to maximize accuracy and minimize repair frequency and cost.

The turbines, 1 1/2" to 8", are available with main cases of either traditional waterworks or NSF-61 certified bronze.

The H4000, sizes 1½'' through 12'', is an inferential cold-water meter with a rotor that measures accurately in either direction, driving the rotor in direct proportion to the velocity of the water passing through the meter.

The H4000 is recommended for industrial monitoring of high flows of cold water (less than 120° F) for direct read, remote totalization, and batching and continuous processes for rate of flow and bi-directional flows. The H4000 is suitable for services up to 230 psi.

The R1000, sizes 2'' to 10'', is designed for measurement of high flows of cold water, in-plant applications for dirty water, standard agriculture, river and lake pumping applications as well as normal irrigation applications for water resource management.

The R1000 is an inferential meter providing accuracy ± 2% in the normal flow range. Water passing through the meter drives the vertical measuring element in direct proportion to the velocity of the water. The meter's rotor revolutions are transferred to a register or register/pulser assembly by a magnetic drive.

Please call 888-667-4278 or 513-942-3600 for sizing, application or to place an order.


Hot Water Meter

For monitoring hot water flows for batch or continuous flow processes, Elster AMCO Water provides five models of inferential meters to accommodate a variety of flow rates, pipe sizes and maximum temperatures.

At the lowest flow rates (¼ to 22 gpm) and pipe diameter (¾”) is the model S130 inferential meter, of the single jet design. Model M150, a multi-jet design meter, is available in sizes 1 and 1 ½” NPT inlet and outlet, for flows from 1/3 to 31 gpm and 7/8 to 88 gpm, respectively. Both the S130 and S150 are brass case meters suitable for measuring water up to 195º F and services up to 150 psi, and both can be equipped to provide dry contact reed switch output of 1 contact per gallon (or per 10 liters).

Brass case/brass top plate model M190, multi-jet inferential meters are provided in sizes 1 and 1 ½”, for flows from ½ to 31 gpm and 7/8 to 88 gpm, respectively, in services with pressure up to 230 psi and 266º F. An externally powered pulser insert is available to provide a dry contact reed switch output of 1 contact per gallon (or per 10 liters).

Model H4300 is a Woltman design horizontal impeller, with only two moving parts, the impeller and magnet. The H4300, in sizes 2” to 6” that operate with low flow accuracy ± 3% and accuracy ± 1% up to peak flow, is recommended for measurement up to 250º F and pressure up to 230 psi. Either a reed switch element or opto-electronic pulse transmitter can be selected for the H4300.

Model H4400, can be installed in services where water temperature can reach 350º F and pressures are up to 195 psi, 250 º F where pressure reaches 230 psi. Available in sizes 2”, 3” and 4” model H4400 offers improved low flow performance ± 2%. Two externally powered pulser models are available for the H4400, a reed switch pulser for output of 1 contact per 10 gallons or per 100 USG and an inductive (Namur) pulser for higher resolution, 3.785 contacts per 1 USG.

Please call 888-667-4278 or 513-942-3600 for sizing, application or to place an order.


SingleMag Water Meter


SingleMag Water Meter.pdf

The Norgas SingleMag 3/4" water meter is a durable, highly accurate meter that comes equipped with a pulse output in a compact design. The SingleMag Water Meter is an accurate, reliable, cost effective solution for residential utility billing.

Features: Magnetic drive, low torque register measuring in gallons. Register is also magnet resistant and dry to prevent from moisture intrusion. Finger strainer installed to protect the meter from any incoming debris. Rugged design for stable accuracy in aggressive environments.

Pulse Output: Pulse output (contact closure) to interface with almost any wireless transmitter or remote metering device.

Measuring Chamber: .25 gpm low flow. Wide effective flow range. Dry free rotating register in durable enclosure.

For more information and detailed technical specs., click here.

Please call 888-667-4278 or 513-942-3600 for sizing, application or to place an order.


MultiMag Water Meter


·Multi-jet Type
·Pulse Output
·Meets AWWA C-708

Multi-Mag combines the advantages of multi-jet technology and a pulse output. Over 2 million in service world-wide.

MultiMag Water Meter PDF

For more information and detailed technical specs., click here.

Please call 888-667-4278 or 513-942-3600 for sizing, application or to place an order.


Oil Meter

For measurement of a wide viscosity range, including light, medium and even heavy heating oil and diesel oil, the Elster AMCO Water line offers oil meters from 1/8” through 2”, covering flows from ¼ to 8000 gph with accuracy ± 1%.

At the very lowest flow rates (¼ to 50 gph / 1 to 200 l/h) and operation up to 140ºF, Elster offers compact Oil Meter Models Elster4 and Elster8. Designed for measurement of #2 oil, Elster4 and Elster8 are suitable for measuring gasoline and other light heating oils for line lubrication and for heating units and industrial furnaces, gasoline engines, including emergency generators, and gasoline applications, as well as industrial batching or rate of flow applications.

Oil Meter Models Elster15 (1/2”), Elster20 (3/4”), Elster25 (1”), Elster40 (1 ½") and Elster50 (2") are designed for monitoring oil (#2 through #6 on ¾” or larger sizes) in higher volume applications- including burners and boilers, fuel consumption in land or sea-based diesel and gasoline engines, industrial batching and rate of flow process control. Depending on size, meters provide highly accurate measurement of flows from 2.6 gph to 8000 gph (10 l/h to 30,000 l/h) up to 266º F. Standard threaded end units operate up to 225 psi; flanged end units are also available for operation up to 355 psi.

All Elster AMCO Oil Meters can be equipped with both high and low-speed pulse output, for multi-dimensional interfacing for batching operations and rate of flow or remote totalization and control.

Please call 888-667-4278 or 513-942-3600 for sizing, application or to place an order.

 

 

Home | New Products | Gas Meters | Water Meters | Regulators | Valves | Accessories | About Us | Contact Us | Policies | Request a Catalog
Norgas Metering Technologies, Inc. |
Pulsar Retrofit Pulsers | Remote Metering Options

Norgas Controls, Inc.
473 Commercial Dr.
Fairfield, OH 45014

Copyright © 2003-2008 Norgas Controls, Inc.

www.norgas.com
888-NORGAS-8
513-942-3600
Fax
513-942-0096 
info@norgas.com

We gladly accept 


This site designed by IVY Technologies, Inc.
Questions about the site? info@ivytech.com